Brother mp-21c/cdx - Manual (Page 39)

CHAPTER 4 MAINTENANCE
4-3
!
Caution
Throw away the removed ink cartridges immediately so that you do not
re-install the old one by mistake.
3. Open the new ink cartridge box and take the cartridge out of the bag.
✒
Note
You can recognize whether the cartridge is used or new by the white gum
on the rear of the cartridge. If it is stained with ink, it is a used ink
cartridge.
4. Insert the new cartridge, making sure to insert it into the correct
position. Push it in until you hear a click as it locks into position.
Make sure that the Ink LED(s) ( (BC) LED and/or (MY)
LED) turn off.
Fig. 4-2 Install a New Ink Cartridge
5. Close the top cover. The printer will automatically start cleaning the
print head. Wait until all the LEDs stop blinking.
Warning
If ink stains your body or clothing, wash with soap or detergent
immediately.
If ink gets in your eyes, irrigate them with water immediately and
consult a doctor if you are concerned.
!
Caution
Once you have installed the cartridge, DO NOT take it out until the Ink
LED( (BC) LED and/or (MY) LED) blinks or comes on or until
the ink runs out. Once you have removed an ink cartridge, DO NOT re-
install it.