Brother mp-21c/cdx - Manual (Page 29)

USER’S GUIDE
2-8
How to Load Envelopes in the Straight Paper Path Slot
1. Take an envelope and insert it into the Straight Paper Path slot. Be
sure to adjust the paper to the mark below.
Fig. 2-5 Loading Envelopes
✒
Note
•
When you load envelopes, insert the envelope carefully so that it won't
skew.
•
Do not print on the rear of envelopes. If you do, it might damage the
printer.
•
When loading envelopes, load them with the print side face up.
•
When you print on envelopes, be sure to load them with the short edge
downwards with the flap to the left hand side when you view the printer
from the front.
• • • • When an envelope is curled, straighten it before printing.
Fig. 2-6 Straighten the Envelopes
• • • • Fold the flap securely with a pen or with your finger before loading
envelopes.
Fig. 2-7 Fold the flap
• • • • Make sure that the amount of curl of the envelope is less than 5 mm
when you load envelopes. Curl at the edge of envelopes must be less than
1 mm. If you print on these envelopes, it might damage the printer.
5mm(0.195 " )
1mm
Fig. 2-8 curl height Curl at the edge