Brother mp-21c/cdx - Manual (Page 25)

USER’S GUIDE
2-4
ABOUT BROTHER SPECIAL PAPER
!
Caution
When you print on coated paper, transparencies and glossy paper, be sure
to select the correct media in the ‘Quality/Color’ tab in the printer driver.
About Brother Special Coated Paper
We recommend you use Brother special coated paper, depending on the
resolution you are using, for you to get the brilliant color output you
expect.
For Fine quality:
Quality Coated Paper for 360 dpi Color InkJet printing
NO. BP36CL (letter)
BP36CA (A4)
For Super Fine quality:
High Quality Coated Paper for 720 dpi Color InkJet printing
NO. BP72CL (letter)
BP72CA (A4)
These papers are manufactured specifically for this printer to provide
optimum print quality. When using these papers please follow the notes
below:
•
There is a surfaced side and non-surfaced side to the paper, and it is
specially coated only on the surfaced side. Therefore, when loading
paper in the printer, make sure that the whiter side (the coated
surface) is facing up.
•
DO NOT touch the coated side of the paper, as it will absorb water
and perspiration easily and might cause decreased output quality.
•
Be sure to use the most suitable coated paper, according to the
resolution you are using. If you do not use the most suitable paper
you may not get good print output quality.
•
When storing paper, keep it in the original bag and seal the bag.
Make sure you keep the paper flat. Keep paper away from moisture
and out of the direct rays of the sun.
•
Printing resolution (Set from the printer driver):
Select Normal mode for 360 dpi printing
Select Super Fine mode for 720 dpi printing