Brother FAX-T104 Series - Manual (Page 73)

Quick-Dial numbers and dialling options
7 - 5
One-Touch dialling
1
Pick up the handset.
—OR—
Press Speaker Phone (FAX-T106 only).
2
When you hear a dial tone, press the One-Touch key of the
location you want to call.
3
To hang up a voice call, replace the handset.
—OR—
Press Speaker Phone (FAX-T106 only).
Speed-Dialling
1
Pick up the handset.
—OR—
Press Speaker Phone (FAX-T106 only).
2
When you hear a dial tone, press Search/Mute, press #, and
then press the two-digit Speed-Dial number.
3
To hang up a voice call, replace the handset.
—OR—
Press Speaker Phone (FAX-T106 only).
If you try to use a One-Touch location with no number stored
in it, you will hear a warning sound, and LCD will show
NOT REGISTERED
. The LCD returns to normal after two
seconds.
If you are sending a fax, press Fax Start after pressing the
One-Touch key. If you picked up the handset or pressed
Speaker Phone (FAX-T106 only), press Fax Start when the
receiving fax machine answers with fax tones.
If you are sending a fax, press Fax Start after entering the
Speed-Dial number. If you picked up the handset or pressed
Speaker Phone (FAX-T106 only), press Fax Start when the
receiving fax machine answers with fax tones.