Brother FAX-T104 Series - Manual (Page 49)

Setup Receive
5 - 9
Setup Delayed Polling Receive
You can set the machine to begin Polling Receive at a later time.
1
Press Menu/Set, 2, 7.
2
Press
▲ or ▼ to select TIMER.
Press Menu/Set.
3
The screen prompts you to enter the time you want to begin
polling.
4
Enter the time (in 24-hour format) you want to begin polling.
For example, enter 21:45 for 9:45 PM.
5
Press Menu/Set.
6
Enter the fax number you are polling.
7
Press Fax Start.
The machine makes the polling call at the time you entered.
Sequential Polling
The machine can request documents from several fax units in a
single operation. You just specify several destinations in Step 4.
Afterwards, a Sequential Polling Report will be printed.
1
Press Menu/Set, 2, 7.
2
Press
▲ or ▼ to choose
STANDARD , SECURE or
TIMER .
Press Menu/Set when the screen displays the setting you
want.
3
If you selected STANDARD, go to Step 4.
■
If you selected SECURE, enter a four-digit number and
press Menu/Set, and then go to Step 4.
■
If you selected TIMER, enter the time (in 24-hour format)
you want to begin polling and press Menu/Set, and then
go to Step 4.
4
Specify the destination fax machines, which you wish to poll
by using One-Touch, Speed-Dial, Search or a Group. For
example, for One-Touch 3 and Speed-Dial location 09, press
One-Touch Dial key 3, Search/Mute, # and 09. (See How to
dial on page 6-1.)
5
Press Fax Start.
6
The machine polls each number or group number in turn for a
document.
You can set up only one Delayed Polling.
POLLING RX
POLLING:STANDARD