Brother FAX-T104 Series - Manual (Page 16)

1 - 3
Introduction
FAX-T104 control panel overview
1 LCD (Liquid Crystal Display)
Displays messages on the screen to help you set up and use
your fax machine.
2 Dial Pad
Use these keys to dial telephone and fax numbers and as a
keyboard for entering information into the fax machine.
The # key lets you temporarily switch the dialling type during a
telephone call from "PULSE" to "TONE".
3 R
Use this key to gain access to an outside line and/or to recall
the operator or transfer a call to another extension when it is
connected to a PABX.
4 Tel
Use to toggle the line between handset and monitor speaker.
5 Redial/Pause
Redials the last number you called. It also inserts a pause in
Quick-Dial numbers.
6 Search/Mute
Lets you look up numbers stored in the dialling memory, lets
you put calls on hold and lets you dial stored numbers by
pressing # and a two-digit number.
7 Receive Mode
Use to select how your fax machine will handle incoming calls.
8 Resolution
Adjusts the resolution when you send a fax or make a copy.
9 Stop/Exit
Stops a fax, cancels an operation or exits from the menu.
: Fax Start
Starts an operation, such as sending a fax.
1
2
3 4 5 6 7 8 9 10
11
12
13