Philips DVDQ50AT99 - Manual (Page 52)

52 Smart Power-off, Low power standby
Smart Power-off
If Smart Power-off is enabled, the DVD Player will turn off if play
stops and you do not use the remote or Player for 20 minutes.
1
Press SYSTEM MENU. will be selected.
2
Press 9 repeatedly to select , then press :.
3
Press 9 repeatedly to select Smart Power-off, then press :.
4
Press 8 or 9 to choose Enabled or Disabled, then press
OK. If you do not want the DVD Player to switch to Standby when
the Player is not in use for more than 20 minutes, choose Disabled.
5
Press SYSTEM MENU to remove the menus.
1,5
2-4
Z Y d
1en 1en 1 st
Access control
Status window
G Low power standby
PBC
r Beeper
Help text
Enabled
Smart Power-off Disabled
Low power standby
If Low power standby is On and you do not use the Player for 20
minutes, the image on the TV screen will dim. The DVD logo will
show in the display. This may not affect some users in the U.S.A.
This is only active if Smart Power-off is disabled. If Smart Power-
off is enabled, the Player will turn off instead.
1
Press SYSTEM MENU. will be selected.
2
Press 9 repeatedly to select , then press :.
3
Press 9 repeatedly to select Low power standby. Press :.
4
Press 8 or 9 to choose On or Off, then press OK.
5
Press SYSTEM MENU to remove the menus.
1,5
2-4