Hookups (cont’d) 11, Connecting to a tv only tv has an s-video in jack, Helpful hint – Philips DVDQ50AT99 User Manual
Page 11
1
Connect the supplied S-Video cable to the S-VIDEO OUT
jack of the DVD Player and to the TV’s S-VIDEO IN jack.
2
Connect the red and white cables of the supplied three-
prong audio/video cable to one set of the Left and Right
AUDIO OUT jacks on the DVD Player. Connect the
other end of the cables to the left/right AUDIO IN jacks
on the TV. Match the cable colors to the jack colors.
3
Connect the flat end of the DVD Player’s power cord
(supplied) to the MAINS (AC Power) jack on the back of
the Player.
Connect the power cords of the Player and the TV to a
power outlet.
Turn on the TV power. Press STANDBY-ON on the DVD
Player to turn on the Player. The Standby light will disappear.
4
Set the TV to the correct S-Video In channel.
This channel
might be near channel 00. See your TV owner’s manual for
details. Or, change channels at the TV until you see the DVD
logo on the TV screen.
Hookups (cont’d) 11
Connecting to a TV Only
TV has an S-Video In Jack
MAINS
SURROUND
MULTICHANNEL AUDIO OUT
SUB WF FRONT
AUDIO
OUT
CVBS
P
r
/C
r
P
b/
C
b
VIDEO OUT
Y
S-VIDEO
OPTICAL
COAXIAL
P
r
/C
r
P
b/
C
b
Y
PROGRESSIVE SCAN OUT
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
SURROUND CENTER FRONT
R
L
R
L
2
1
Back of TV
(example only)
LEFT AUDIO IN
RIGHT AUDIO IN
LEFT AUDIO IN
RIGHT AUDIO IN
Cr/R-Y
Y
Cb/B-Y
S-VIDEO IN
Unused
Yellow
Plug
Unused
Yellow
Plug
1
2
3
• On the TV, the S-Video In jack
may be labeled Y/C, S-Video, or
S-VHS (super video).
Helpful Hint