Philips DVDQ50AT99 - Manual (Page 46)

46 Digital CrystalClear
Digital CrystalClear allows you to fine-tune certain
settings for Progressive Scan. These adjustments are useful only if
you used the PROGRESSIVE SCAN Out jacks on the back of the
DVD Player to connect to a TV that has Progressive Scan. Details
are on page 10.
1
Press SYSTEM MENU. will be selected.
2
Press 9 to select , then press :.
3
Press 9 repeatedly to select Digital Crystal Clear, then
press :.
4
Press 8 or 9 to choose Chroma Delay, Gamma, Sharpness,
or DCDi, then press :. Press 8 or 9 to adjust the setting.
Press ; to go back and select a different item.
● Chroma Delay - If the Chroma Color and Chroma Brightness
signal do not synchronize, adjust the delay of the chroma signal
to get a perfectly clear picture.
● Gamma - Adjust the intensity of the picture non-linearly. A
positive value allows you to bring out low level detail in a dark
scene. A negative value emphasizes contrast.
● Sharpness - Adjust the sharpness of the picture.
● DCDi - This setting computes and tracks the angle of the edge
to fill in the missing pixels on the TV screen. Select “Y” (Yes)
at DCDi to improve the image quality significantly, especially
during slow motion playback. Or, select “N” (No) to disable
the feature.
5
Press SYSTEM MENU to remove the menus.
Z Y d Z Y d
1,5
2-4
Z Y d
1en 1en 1 st
TV Shape Chroma Delay
+2
Black level shift Gamma +
G Video shift Sharpness
Color settings DCDi
r Personal color
Digital Crystal Clear
TV System