32 access control (cont’d) – Philips DVDQ50AT99 User Manual
Page 32
32 Access Control (cont’d)
1
Insert a Disc. The Access Control message will appear on the
TV screen, and Ç will appear in the DVD Player’s display.
2
Press the 8 or 9 button to select Play once or Play
always. Then, press the Number buttons to enter your
four-digit code.
●
If you select Play Once, the Disc can play as long as it is in the
DVD Player and the DVD Player power is On.
●
If you select Play Always, the Disc will play always, even if you
set Child Lock to Ç (Locked). Details are on page 31.
3
If you later decide to lock the Disc so that it will not play
always:
When you insert the Disc, playback begins automatically and safe
{
{ appears on the TV screen. Press the STOP C button
while safe {
{ is on the TV screen. Locked |
| will appear. If
the Disc continues playing, press the STOP C button again to stop
playback. You may need to turn off the DVD Player or remove
the disc before the Disc is completely Locked. The next time you
turn on the DVD Player, the Disc will not play unless you enter
the four-digit code.
• The Access Control screen will
appear when you try to play a
Locked Disc. If you do not know
your code, press STOP çC. Then,
select Access Control as described
in steps 1-3 on page 30. When
you are asked to enter the code,
press STOP C four times. Press
SYSTEM MENU, then press PLAY
B
to start playback. This restores
all the Access Control settings to
their original factory settings.
• Two-sided DVDs may have a dif-
ferent ID for each side. To unlock
the entire Disc, unlock each side.
• Multi-volume Video CDs may
have a different ID for each vol-
ume. To unlock the complete set,
unlock each volume.
Helpful Hints
locked
Access Control
|
p
Play once
[ ] [ ] [ ] [ ]
Play always
[ ] [ ] [ ] [ ]
Choose 'Play always' to insert the disk in
the child-safe list
1
Locking or Unlocking Specific Discs
Not all DVDs are rated or coded by Parental levels. You may
choose to specifically lock or unlock a Disc by choosing Play once
or Play always. This way, you can disable viewing regardless of the
rating of the DVD. You will need to know your 4-digit code in
order to view the Disc.
The DVD Player can memorize Lock/Unlock settings for 120
Discs. A Disc is memorized, or unlocked, when you select Play
Always. Playing an unlocked Disc will place it at the top of the list.
When the list is full and a new Disc is added, the last Disc in the
list will be removed from the list.
Insert a Disc.
2
3