Country, Changing the 4-digit code – Philips DVDR150099 User Manual
Page 53
English
ACCESS CONTROL 53
Country
1
Press SYSTEM MENU.
2
Press t (left cursor) to select
in the system
menu bar.
3
Press w (down cursor) repeatedly to select
,
then press u (right cursor).
4
Access control will be selected in the features
menu
. Press u (right cursor).
5
Enter the four digit code using the 0-9 buttons.
6
Move to
Change country using w (down cursor.)
7
Press u (right cursor.)
8
Select the country for which your disc is coded
using w/v (down or up cursor.) See the disc case
for details on whether it has Parental Level settings
for specific countries. If it does not, this procedure
is not necessary.
9
Press OK or t (left cursor) to confirm. Press
SYSTEM MENU to exit the menu.
Changing the 4-digit code
1
Press SYSTEM MENU.
2
Press t (left cursor) to select
in the system
menu bar.
3
Press w (down cursor) repeatedly to select
,
then press u (right cursor).
4
Access control will be selected in the features
menu
. Press u (right cursor).
5
Enter the old 4-digit code using the 0-9 buttons.
6
Move to
Change code using w (down cursor.)
7
Press the u (right cursor) button.
8
Enter the new 4-digit code using the 0-9 buttons.
9
Enter the exact same code a second time and
reconfirm by pressing OK.
10 Press SYSTEM MENU to exit the menu.
Note: If you forgot your code, press 9 STOP four times at
step 5, then press OK. Access control is now off. You can
enter a new code as described above.