Philips DVDR150099 - Manual (Page 14)

English
14 INSTALLATION
Installation
Connections - back of your DVD
Recorder
- Please refer to your TV, VCR, Stereo and any other
User Manual(s) as necessary to make the optimal
connections.
- Do not connect the power cards until all other
connections are made.
- Do not connect your DVD Recorder to your TV via
your VCR. The video quality could be distorted by the
copy protection system.
- For better sound, connect the Recorder’s audio
outputs to your amplifier, receiver, stereo system or
A/V equipment. See ‘Connecting to an A/V receiver or
A/V amplifier.’
Caution:
Do not connect the Recorder’s audio output to
the phone input of your audio system. This could
damage your equipment.
Step 1: Connecting to the
antenna or Cable TV signal
l Remove the antenna cable from your TV and
connect it to the ANTENNA jack at the back of the
DVD Recorder.
l Connect one end of the antenna cable supplied (1)
to the TV jack on the DVD Recorder and the other
end to the antenna input jack on your TV.
The antenna connection transmits TV channels through
the Recorder to the TV, you still need a video
connection to sent DVD playback from the Recorder to
the TV. See ‘Connecting to a TV.’
Step 2: Connecting to a TV
To obtain the highest possible picture and sound quality
from your TV, use the Progressive Scan video jacks on
the DVD Recorder and TV.
Progressive Scan connection
l Connect the PROG SCAN OUT (YP
B
P
R
) jacks on
the Recorder to the corresponding IN jacks on the
TV, using the Component Video cable supplied (2)
as shown in the drawing.
l Connect the audio Left (white) and Right (red) OUT
jacks on the Recorder to the corresponding AUDIO
IN jacks on the TV using the audio cables supplied
(4).
Note:
The
PROG SCAN OUT jacks do not carry Closed
Captioning or V-chip signals. These features will not be
available if you use the Progressive Scan connection.
Component Video (YP
B
P
R
) connection
If your TV does not have Progressive Scan connect the
DVD Recorder with the Component Video jacks.
l Connect the COMPONENT VIDEO (YP
B
P
R
) OUT
jacks to the corresponding IN jacks on the TV, using
the Component Video cable supplied (2) as shown
in the drawing.
l Connect the AUDIO Left (white) and Right (red)
OUT jacks to the corresponding AUDIO IN jacks
on the TV using the audio cable supplied (4).
l Do not connect a Progressive Scan video source to
the Component Video IN jacks on your TV.
Apparatus Claims of U. S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited viewing uses only.
COMPONENT VIDEO PROG
SCAN
EXT 2
Y Y
P B P B
P R
Y
L
L L
R R R
P B
P R P R
EXT 3 EXT 3
EXT 1 EXT 1/2
IN RC 6
2
4
TV
1
Apparatus Claims of U. S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited viewing uses only.
COMPONENT VIDEO PROG
SCAN
EXT 2
Y Y
P B P B
P R
Y
L
L L
R
R R
P B
P R P R
EXT 3 EXT 3
EXT 1 EXT 1/2
IN RC 6
2
1
4
TV