This page deals with problems that can be corrected by the user. If the problem still persists after you have
tried these solutions, contact your nearest Philips dealer.

Common Problems

Having this problem?

Check these items

No Picture

(Power LED not lit)

Make sure the Power cable is plugged to the
wall and the back of the monitor.

●

Firstly, ensure that the power button in front of
the monitor is in the OFF position, then press
it to the ON position again.

●

No Picture

(Power LED is flashing)

Make sure the computer is turned on.

●

Make sure the signal cable is properly
connected to your computer.

●

Check to see if the monitor cable has bent
pins.

●

The Energy Saving feature may be activated

●

Screen says

Make sure the monitor cable is properly
connected to your computer. (Also refer to the
Quick Set-Up Guide).

●

Check to see if the monitor cable has bent
pins.

●

Make sure the computer is turned on.

●

AUTO button not working properly

The Auto Function is designed for use on
standard Macintosh or IBM-compatible PCs
running Microsoft Windows.

●

It may not work properly if you are using a
non-standard PC or video card.

●

Imaging Problems

Display position is incorrect

Press the Auto button.

●

Adjust the image position using the Horizontal
Position &/or Vertical Position in OSD Main
Controls.

●

Image vibrates on the screen

Check that the signal cable is properly
connected to the graphics board or PC.

●

Troubleshooting

file:///D|/TV/english/180mt/safety/saf_troub.htm (1 of 3) [4/2/2003 10:42:13 AM]