Philips 180MT13P99 - Manual (Page 28)

10 Sound mode
To switch from STEREO to MONO or to choose
between Dual I and Dual II for bilingual
transmissions.
For TV sets fitted with NICAM reception,
depending on the transmission, you can switch
from NICAM STEREO to MONO or choose
between NICAM DUAL I, NICAM DUAL II and
MONO.
●
If using Teletext, press this button to display dual
pages on screen.
●
11 Previous programme To access the last programme viewed.
12 Screen information
To display/clear the programme number, the name (if it
exists), the time, the sound mode and the time
remaining on the timer.
Hold down for 5 seconds to permanently display the
programme number on the screen.
The volume level and the smart control adjustments are
then displayed each time they are used.
13
Selecting TV
programmes
To move up or down a programme.
The number, (the name) and the sound mode are
displayed for a few seconds.
For some TV programmes the title of the programme
appears at the bottom of the screen.
14
PC/TV mode
selection
To select TV or PC mode
15
Smart picture
controls
To select your desired picture setting from 5 picture
settings: RICH, NATURAL, SOFT, MULTIMEDIA and
PERSONAL.
16 Numerical keys
For direct access to programmes
For a 2-digit programme number, the 2nd digit
must be entered before the dash disappears.
●
If using TV 'STANDBY', press any of number keys
to return to 'ON'
●
17 Programme List
To navigate through a list of installed programmes to
obtain a quick overview of the programmes & activate
the programmes you have selected.
TV Control
file:///D|/TV/english/180mt/osd/tv_control.htm (3 of 10) [4/2/2003 10:42:00 AM]