Philips 180MT13P99 - Manual (Page 116)

You can select a specific channel to
appear on the television when the timer
turns the set ON. Follow these steps to
select the channel.
Press the MENU button on the remote
control to show the on-screen menu. 1.
Press twice to highlight FEATURES. 2.
Press and the menu will shift to the
left. TIMER will be highlighted.
3.
Press again to shift the menu to the
left. Then press repeatedly until the
CHANNEL control is highlighted.
4.
Press the NUMBERED buttons to
enter the desired start-up channel or
press
repeatedly to enter the
startup channel you want.
5.
Press the MENU button repeatedly to
clear the menu from the screen. 6.
RETURN TO TOP OF THE PAGE
Setting Activate to ON or OFF
After you have set the Time, Start Time,
Stop Time, and Start Channel, the timer
must be set to come on ONCE or
DAILY, or turned OFF using the
ACTIVATE control.
Press the MENU button on the remote
control to show the on-screen menu. 1.
Press twice to highlight FEATURES. 2.
Press and the menu will shift to the
left. TIMER will be highlighted.
3.
Press again to shift the menu to the 4.
Using other menus (NTSC_2)
file:///D|/TV/english/180mt/osd/n_f.htm (4 of 17) [4/2/2003 10:42:56 AM]