Auto programme – Philips 180MT13P99 User Manual
Page 101
Press the MENU button on the remote control to
show the on-screen menu.
1.
Press repeatedly until INSTALL is highlighted.
2.
Press
to shift the
menu to the left.
3.
Press once to
highlight the TUNER
MODE.
4.
Press
to highlight the
tuner option.
5.
With the TUNER MODE
set to AUTO, Auto
Program (see left) will
detect whether or not
cable input is present. If,
however, you want to set
the TUNER MODE to
CABLE or ANTENNA,
press or until either
CABLE or ANTENNA is
highlighted.
6.
Press the MENU button
repeatedly to clear the
menu from the screen.
7.
Smart Help
When CABLE is selected, channels
1-125 are available. When
ANTENNA is selected, channels
2-69 are available.
Auto Program
Press the MENU button on the
remote control to show the
on-screen menu.
1.
Press repeatedly until INSTALL
is highlighted.
2.
Press
to shift the menu to the left.
LANGUAGE will be highlighted.
3.
Press repeatedly until the AUTO
PROGRAM control is highlighted.
4.
Press
to start the Auto Program
scanning of channels.
5.
Press the MENU button repeatedly to
6.
Using other menus (NTSC_1)
file:///D|/TV/english/180mt/osd/n_other.htm (2 of 7) [4/2/2003 10:42:41 AM]