Philips 180MT13P99 - Manual (Page 102)

clear the menu from the screen.
Smart Help
After you've run Auto Program, check the results.
Press the CHANNEL (+) or (-) button and see which
channels you can select.
Remember an antenna or Cable TV signal must be
connected to your Monitor TV first (see the '
Basic
Monitor TV connection ' section)
If you want to delete any unwanted channels from the
memory of the Monitor TV, see the '
Channel Edit '
section.
RETURN TO TOP OF THE PAGE
Manual
The Fine Tuning feature allows you to
adjust picture reception in an area of
poor reception.
Press the MENU button on the remote
control to show the on-screen menu. 1.
Press repeatedly until INSTALL is
highlighted. 2.
Press to shift the menu to the left. 3.
Press repeatedly until MANUAL is
highlighted. 4.
Press to shift the menu to the left.
FINE TUNE is highlighted.
5.
Press to start fine-tuning. Fine-tune
the channel until the desired picture and
sound is obtained.
6.
Press to highlight STORE. 7.
Press to store the last fine-tuned
status.
8.
Press the MENU button to clear the
menu from the screen or wait for the
on-screen menu to time out and
disappear from screen. 9.
RETURN TO TOP OF THE PAGE
Using other menus (NTSC_1)
file:///D|/TV/english/180mt/osd/n_other.htm (3 of 7) [4/2/2003 10:42:41 AM]