Brady 200M - Manual (Page 22)

Installation
Unpacking
When unpacking the Brady M-Series Printer, make sure you save
all packing materials. Once the printer is out of the box, raise the
printer’s Media Access Door and remove the power cord.
Inspection
Inspect the printer for possible damage incurred during shipment.
•
Check all exterior surfaces for damage.
•
Raise the Media Access Door and inspect compartment for
damage to components.
Reporting Damage
If you discover shipping damage upon inspection:
1. Immediately notify the shipping company of the damage.
2. Retain all packaging material for shipping company inspection.
3. File a damage report with the shipping company and notify
your local distributor and Brady USA, Inc. of the damage.
Brady USA, Inc. is not responsible for any damage incurred
during shipment of the equipment and will not repair this
damage under warranty. Immediate notification of damage to
the shipping company or its insuring agency will generally
result in ensuring any damage claim validity and ultimate
monetary compensation.
Storage and Reshipping
If you are not placing the printer into operation immediately,
repackage it using the original packing materials. The M-Series
Printer may be stored under the following conditions.
•
Temperature: -40° to +158° F (-40° to +70° C)
•
Relative humidity: 5% to 85% non-condensing
In
st
al
la
ti
o
n
2-1