Brady 200M User Manual
Page 17
Ribbon
Ribbon Width
Brady recommends using ribbon at least
as wide as the media you are using to
protect the printhead from wear.
200M
260M
Maximum
4.33"
110 mm
6.85"
174 mm
Minimum
0.95"
24 mm
2.0"
50.8 mm
Standard
Lengths
2:1 media to ribbon roll ratio
984 ft
300 m
984 ft
300 m
3:1 media to ribbon roll ratio
1476 ft
450 m
1476 ft
450 m
Roll size
Inner diameter of core
1.0"
25.6 mm
1.0"
25.6 mm
Outside diameter of full roll of ribbon
3.2"
81 mm
3.2"
81 mm
Zebra Programming Language II (ZPL II
®
)
Bar Codes
°
Downloadable graphics with data compres-
sion
°
Bit image data transfer and printing, includ-
ing mixing of text and graphics
°
Format inversion
°
Mirror image printing
°
Four-position field rotation
(0°, 90°, 180°, 270°)
°
Bitmap and scalable fonts
°
Programmable quantity with print pause
°
Communicates in printable ASCII charac-
ters
°
Controlled by a mainframe, minicomputer,
PC, or other data entry device
°
Serialized fields
°
In-Spec OCR-A and OCR-B
°
UPC/EAN [nominal 100% magnification
(6 dots/mm only)]
°
Code 11, Code 49, Code 93
°
Code 39 (Supports ratios of 2:1, 3:1, 5:2,
7:3)
°
Code 128 (Supports serialization in subsets
B and C and UCC Case C Codes)
°
CODABAR (Supports Ratios of 2:1, 3:1,
and 5:2)
°
Interleaved 2 of 5 (Supports Ratios of 2:1,
3:1, and 5:2; also supports Modulus 10
Check Digit)
°
Industrial 2 of 5, Standard 2 of 5
°
LOGMARS
°
Plessey
°
CODABLOCK
°
MAXICODE
°
UPC-A, UPC-E, UPC EXTENSIONS
°
PDF 417
°
POSTNET
°
Check-digit calculation where applicable
°
MSI
°
EAN-8, EAN-13, EAN EXTENSIONS
Introduction
M-Series User s Guide
1-8