Brother DCP-385C - Manual (Page 88)

82
Checking the print alignment
B
You may need to adjust the print alignment
after transporting the machine if your printed
text becomes blurred or images become
faded.
a
Press Ink Management.
b
Press a or b to choose Test Print.
Press OK.
c
Press a or b to choose Alignment.
Press OK.
d
Press Mono Start or Color Start.
The machine starts printing the
Alignment Check Sheet.
e
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press + (Yes) to
finish Alignment Check, and go to
step h.
If another test print number is a
better match for either 600 dpi or
1200 dpi, press - (No) to choose it.
f
For 600 dpi, press d or c to choose the
number of the test print that most closely
matches the number 0 sample (1-8).
Press OK.
g
For 1200 dpi, press d or c to choose the
number of the test print that most closely
matches the number 0 sample (1-8).
Press OK.
h
Press Stop/Exit.
Checking the ink volume
B
You can check the ink that is left in the
cartridge.
a
Press Ink Management.
b
Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
c
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh
®
in the
Software User's Guide on the CD-ROM.)
Machine Information
B
Checking the serial number
B
You can see the machine’s serial number on
the LCD.
a
Press Menu.
b
Press a or b to choose
Machine Info.
.
Press OK.
c
Press a or b to choose Serial No..
Press OK.
d
Press Stop/Exit.