Brother DCP-385C - Manual (Page 13)

General Information
7
1
7 Ink Management
Lets you clean the print head, print a test page
to check the print quality, and check the
available ink volume.
8 Mode keys:
Scan
Lets you access Scan mode.
Photo Capture
Lets you access PhotoCapture Center™
mode.
9 Warning LED
Turns orange and blinks when the LCD
displays an error or an important status
message.
Note
Most of the illustrations in this User’s Guide
show the DCP-385C.
LCD display indications
1
The LCD display screen shows the mode the
machine is in, the current settings, and the
available ink volume.
1 Wireless Status (DCP-585CW only)
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
2 Ink indicator
Lets you see the available ink volume.
Basic Operations
1
The following steps show how to change a
setting in the machine. In this example the
Paper Type setting is changed from
Plain Paper
to Inkjet Paper.
a
Press Menu.
b
Press a or b to choose
General Setup
.
Press OK.
c
Press a or b to choose Paper Type.
d
Press d or c to choose Inkjet Paper.
Press OK.
You can see the current setting on the
LCD:
e
Press Stop/Exit.
0 Max
Mem. Mem.
Normal
100% 100% Enlarge/Reduce Enlarge/Reduce
Plain Paper Plain Paper Paper Paper Type ype
Ratio: Ratio:
Quality
Mem.
01
2
1
MENU
Network Network
Machine Info. Machine Info.
Initial Setup
Initial Setup
Print Reports Print Reports
Select & Press OK
General Setup
General Setup General Setup
MENU Select & Press OK
Paper Paper Type ype
Paper Size Paper Size
Inkjet Paper Inkjet Paper
A4 A4
10 10 Mins Mins
LCD Settings LCD Settings
Sleep Mode
Sleep Mode