Brother P-TOUCH 7500 - Manual (Page 88)

78
IMAGE CHARACTER
SIZE ERROR!
• This message appears if a
wide user-defined character
image is entered when the
Vertical Label Type mode
is selected.
• Change the Label Type
mode or use a tall user-
defined character image.
INPUT ABCD AT
BEGIN & END!
• This message appears if a
letter between A and D has not
been entered at the beginning
and end of the bar code data
when the CODABAR
protocol is selected.
• Enter a letter between A and
D at the beginning and end
of the bar code data.
LENGTH LIMIT!
• This message appears if you
try to print or use the
Preview function when the
length of the text is greater
than the 1 m limit.
• Delete some of the text.
On 18 mm tape:
LINE LIMIT!
5 LINES MAXIMUM
On 12 mm tape:
LINE LIMIT!
3 LINES MAXIMUM
On 9 mm and 6 mm tape:
LINE LIMIT!
2 LINES MAXIMUM
• This message appears if you
try to print or use the
Preview function when the
number of lines in the text is
greater than the maximum
possible for the installed
tape.
• Reduce the number of lines
or install a wider tape.
MEMORY FULL!
• This message appears if you
try to store a text file after
approximately 2000
characters have already been
stored in the memory.
• Delete an unwanted file to
make space for the new one.
NO DATABASE OR
INCORRECT FORMAT
• This message appears if no
database has been
downloaded to the P-touch
when you press
g
, then
i
.
• Download a database.
NO FILES!
• This message appears if no
files are stored in the
memory when you try to
recall or delete one.
• Store a text file before trying
to recall or delete one.
RECORD NOT
FOUND!
• This message appears when
the specified text or record
number cannot be found in
the database.
• Try searching for different
text or a different record
number.
Error Message Cause Solution
PT75007600uk.book Page 78 Thursday, July 10, 2008 9:39 AM