Brother MFC-253CW - Manual (Page 85)

Printing photos from a memory card or USB Flash memory drive
75
11
e
Do one of the following:
„ To change the quality press OK and
go to step f.
„ To start scanning press Mono Start
or Colour Start.
f
Press a or b to choose the quality, and
then press OK.
Do one of the following:
„ To change the file type, go to step g.
„ To start scanning press Mono Start
or Colour Start.
g
Press a or b to choose the file type,
choose one of the options below:
„ To change the file name press OK
and go to step h.
„ To start scanning press Mono Start
or Colour Start.
h
The file name is set automatically.
However, you can set a name of your
choice using the dial pad. You can only
change the first 6 digits.
Press Mono Start or Colour Start.
Changing the image quality
11
a
Press Menu, 4, 0, 1.
b
Press a or b to choose
B/W 200x100 dpi, B/W 200 dpi,
Color 150 dpi, Color 300 dpi or
Color 600 dpi.
Press OK.
c
Press Stop/Exit.
Changing the monochrome
file format
11
a
Press Menu, 4, 0, 2.
b
Press a or b to choose TIFF or PDF.
Press OK.
c
Press Stop/Exit.
Changing the colour file
format
11
a
Press Menu, 4, 0, 3.
b
Press a or b to choose PDF or JPEG.
Press OK.
c
Press Stop/Exit.