Brother MFC-253CW - Manual (Page 38)

28
5
Entering Fax mode
5
Press (Fax) to enter fax mode.
Faxing from the ADF
(MFC-295CN only)
5
a
Make sure you are in Fax mode .
b
Place the document face down in the
ADF.
(See Using the ADF (MFC-295CN only)
on page 18.)
c
Enter the fax number using the dial pad,
Speed Dial or Search.
d
Press Mono Start or Colour Start.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax while the memory
is full it will be sent in real time.
Faxing from the scanner
glass
5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to Letter or A4 size.
You cannot send colour faxes with multiple
pages.
Note
(MFC-295CN only)
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
a
Make sure you are in Fax mode .
b
Place your document face down on the
scanner glass.
c
Enter the fax number using the dial pad,
Speed Dial or Search.
d
Press Mono Start or Colour Start.
„ If you press Mono Start, the
machine starts scanning the first
page. Go to step e.
„ If you press Colour Start, the
machine starts sending the
document.
e
When the LCD asks you Next Page?
do one of the following:
„ To send a single page, press 2 to
choose No(Dial) (or press
Mono Start again).
The machine starts sending the
document.
„ To send more than one page,
press 1 to choose Yes and go to
step f.
Sending a Fax
5