Philips SENSEO® Latte Select Kaffeepadmaschine - Manual (Page 19)

19
5 Push back the steam inlet (1), connect the milk tube (2) and
close the milk container lid cover (3).
Note: Push back the steam inlet before you close the lid, otherwise the steam
inlet does not fit anymore.
Note: Make sure you push the milk tube far enough onto the connector so that
the holes in the connector are covered.
6 To fasten the milk container lid onto the milk container, first
push the front of the milk container lid onto the edge of the milk
container (‘click’) (1) and then push the rear end onto the milk
container (‘click’) (2).
Note: Make sure all parts of the milk container lid are dry before you
reassemble the lid.
Note: Always check if the lid is fixed properly onto the milk container to
prevent spillage when you place the milk container unit in the machine.
7 Slide the milk container unit into the coffee machine (1) and push
down the milk container lever (‘click’) (2).
cleaning the machine
Danger: Never immerse the machine in water or any other liquid.
cleaning the coffee machine
1 Always unplug the machine before you clean it.
2 Clean the outside of the machine with a damp cloth.
3 Remove the coffee collector.
3
2
1
1
2
1
2
EnglisH 19