Philips SENSEO® Latte Select Kaffeepadmaschine User Manual
Page 15
15
4
Place one or two cups under the coffee spout. To minimise
splattering, turn the knob to adjust the height of the drip tray so that
the top of your cup is just under the spout.
Tip: Do not use cups that are too large as they cause the coffee to get cold
more quickly.
The amounts of the coffee varieties with milk are:
- 160ml for cappuccino ¶.
- 220ml for latte macchiato õ.
- 190ml for caffè latte
%
.
Note: The amount of the milk varieties may vary due to variations in milk
temperature, type of milk, how clean the milk container unit is, etc.
5
Press the button indicating the number of cups of SENSEO
®
coffee
you want to brew.
- Press the 1-cup button q for one cup.
- Press the 2-cup button qq for two cups.
, The SENSEO
®
coffee machine starts brewing.
- The machine automatically supplies the correct amount of water and
milk, depending on the coffee variety selected.
- You can interrupt the brewing process at any time by pressing the
on/off button 3. If you switch the machine back on after having
interrupted the brewing process, the machine does not complete the
interrupted brewing cycle.
Do not remove the water reservoir during a brewing cycle, as this
causes the machine to draw in air. When this happens, the next cup is
only partly filled.
Do not remove the milk container during a brewing cycle.
Note: When the machine brews a coffee variety with milk, some milk always
stays behind in the milk container to guarantee optimal frothing quality.
6
Remove the coffee pod or pods after use by lifting the pod holder
out of the machine and emptying it.
Be careful when you do this, as there may still be some water/coffee on the
coffee pod or pods.
7
Each time you have used the milk container unit to brew a coffee
variety with milk, the CLEAN indicator lights up to remind you to
flush the milk container unit when you no longer intend to brew
a coffee variety with milk right away. Flushing the milk container
immediately after use is very important for reliable performance
of the milk container unit and good frothing results. Follow the
instructions in section ‘Flushing after every use with the CLEAN
button’ in chapter ‘Cleaning the milk container unit’.
8
Switch off the machine after use.
Note: If you do not switch off the machine, it switches off automatically after
30 minutes.
EnglisH
15