Philips SENSEO® Latte Select Kaffeepadmaschine - Manual (Page 10)

10
6 Put the 1-cup pod holder q or the 2-cup pod holder qq in the
machine without pod or pods.
7 Close the lid and lock the lid lever.
Note: Make sure the lid lever is properly locked by pushing it down until it
snaps home with a click. It is not possible to flush the machine when the lid is
not properly closed.
8 Put the plug in an earthed wall socket.
9 Put a bowl (with a capacity of at least 1.5 litres) under the
coffee spout to collect the water.
10 Press the on/off button 3.
, the light rings around the 1-cup button q and the 2-cup button qq
light up continuously.
11 Press the 1-cup button q and the 2-cup button qq briefly at the
same time.
, During the flushing cycle, the water in the water reservoir is flushed
through the machine and the boiler is filled with water. The flushing
cycle takes some time (approx. 90 to 150 seconds). The machine
switches off automatically when the flushing cycle ends. During
the flushing cycle, the machine produces more noise than during a
regular brewing cycle.
Never interrupt the flushing cycle halfway. If you do, the boiler does not
fill itself properly.
Note: If the machine does not work properly, repeat steps 1 to 11. Do not
interrupt the flushing cycle.
EnglisH
10