Philips SENSEO® Latte Select Kaffeepadmaschine User Manual

Page 13

Move the milk container lever upwards to release the milk container

unit. Pull the milk container unit forwards to remove it from the

machine.

Press the milk container lid release lever (1) and remove the milk

container lid from the milk container (2).

Fill the milk container with cold milk straight from the refrigerator

(5-8°C) up to the level required for the coffee variety.

- ¶= amount of milk required to brew one cup of cappuccino.

= amount of milk required to brew one cup of caffè latte.

- õ/ ¶¶= amount of milk required to brew one cup of latte macchiato

or two cups of cappuccino.

Note: We advise you not to use rice or soy milk. These types of milk do not

produce high-quality frothed milk.

To fasten the milk container lid onto the milk container, first

push the front of the milk container lid onto the edge of the milk

container (‘click’) (1) and then push the rear end onto the milk

container (‘click’) (2).

Always check if the lid is fixed properly onto the milk container to

prevent spillage when you place the milk container unit in the machine.

Slide the milk container unit into the coffee machine (1) and push

down the milk container lever (‘click’) (2).

Note: Make sure that the milk container is placed properly by pushing down

the milk container lever as far as possible (‘click’). Proper placement of the

milk container is essential for obtaining properly frothed milk.

EnglisH