B&B Electronics Elinx EIR510-2SC-T - Manual (Page 33)

Manual Documentation Number: EIR510-xSFP-T_0708m 25
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
security enable G Enable IP security
function
switch(config)#security enable
security http G Enable IP security of
HTTP server
switch(config)#security http
security telnet G Enable IP security of
telnet server
switch(config)#security telnet
security ip
[Index(1..10)] [IP
Address]
G Set the IP security list switch(config)#security ip 1
192.168.1.55
show security P Show the information
of IP security
switch#show security
no security G Disable IP security
function
switch(config)#no security
no security http G Disable IP security of
HTTP server
switch(config)#no security http
no security telnet G Disable IP security of
telnet server
switch(config)#no security telnet
Port Commands Set
Commands Level Description Example
interface fastEthernet
[Portid]
G Choose the port for
modification.
switch(config)#interface
fastEthernet 2
duplex
[full | half]
I Use the duplex
configuration
command to specify
the duplex mode of
operation for Fast
Ethernet.
switch(config)#interface
fastEthernet 2
switch(config-if)#duplex full
speed
[10|100|1000|auto]
I Use the speed
configuration
command to specify
the speed mode of
operation for Fast
switch(config)#interface
fastEthernet 2
switch(config-if)#speed 100