Brother FAX 275 - Manual (Page 62)

48
C H A P T E R E I G H T
One Touch Dialing
1 Pick up the handset—OR—Press Hook .
2 When you hear a dial tone, press the One Touch key of the location you
want to call.
3 If you pressed Hook to dial the call, pick up the handset when the other
party answers. (The speaker works only one way; the other party won’t
be able to hear you unless you pickup the handset.)
4 To hang up a voice call, replace the handset.
If you try to use a One Touch location with no number stored in it, you
hear a warning sound, and screen displays NOT REGISTERED. The
display returns to normal after 2 seconds.
If you are sending a fax, press Start after pressing the One Touch key. If
you picked up the handset, press Start when the receiving fax machine
answers with fax tones.
Speed Dialing
1 Pick up the handset—OR—Press Hook .
2 When you hear a dial tone, press Speed Dial , then press the two-digit
Speed Dial number.
3 If you pressed Hook to dial the call, pick up the handset when the other
party answers. (The speaker works only one way; the other party won’t
be able to hear you unless you pickup the handset.)
4 To hang up, replace the handset.
If you are sending a fax, press Start after entering the Speed Dial
number. If you picked up the handset, press Start when the receiving fax
machine answers with fax tones.
Hold
1 Press Hold/Caller ID to put a call on Hold.
2 You can put down the handset without disconnecting the call.
3 Pick up the fax machine handset to release the call from Hold. Picking
up an extension handset will not release the call from Hold.
See
Storing Speed
Dial Numbers
p. 45
See
Storing One
Touch Dial
Numbers
p. 43