Brother FAX 275 - Manual (Page 43)

5
Setup
Receive
29
Basic Receiving Operations
Select Answer Mode
MANUAL—You must answer all calls yourself. If you hear fax tones, press
Start to begin receiving the fax, then hang up. You must use this mode with
Distinctive Ringing.
FAX ONLY—The fax machine automatically answers every call as a fax
call. You cannot receive a voice call, but you can dial out and make a voice
call.
FAX/TEL—The fax machine automatically answers every call. If the call is
a fax, it prints the fax. If the call is not a fax, it signals you with a double
ring (ring-ring), different from the phone company ringing, to alert you to
pick up the call. If you select this setting, you’ll need to set the Ring Delay
and F/T Ring Time features (on the following pages). If you have extension
phones on the same line as the fax machine, set the Ring Delay to 4.
TAD—This is the only setting in which you can use an external answering
machine. Your telephone answering device is connected to your FAX, and
answers every call. Once the TAD answers, the FAX listens for fax tones. If
it detects fax tones, it prints the fax.
The TAD setting works only with an external telephone answering device
(TAD); it does not work with telephone company voice mail. Ring Delay
and F/T Ring Time do not work in this setting.
See
Distinctive
Ring
p. 51
See
For FAX/TEL
Mode Only
p. 33