Brother FAX 275 - Manual (Page 47)

33
S E T U P R E C E I V E
For FAX/TEL Mode Only
When the fax machine is in FAX/TEL mode, it will use the F/T Ring Time
(double ringing) to alert you to a voice call. If you’re at the fax machine,
you can lift the handset to answer.
If you’re at an extension phone, you’ll need to lift the handset during the
F/T Ring Time and press
5 1 between the double rings. If no one is
on the line, or if someone wants to send you a fax, send the call back to the
fax machine by pressing
5 1 .
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset
Fax Receive Code is
5 1 . The preset Telephone Answer Code is
5 1 .
If you are always disconnected when accessing your external TAD remotely,
try changing the Fax Receive Code from
5 1 to and the
Telephone Answer Code from 5 1 to 9 9 9 .
To change Remote Codes
1 Press Function , 2 , 4 .
2 Press or to select ON (or OFF) and press Set .
REMOTE ACT.:ON?
3 If you want to, enter a new Fax Receive Code, then press Set .
FAX RECEIVE: * 51
4 If you want to, enter a new Telephone Answer Code, then press Set .
TEL ANSWER:#51
5 Press Stop to exit.