Brother FAX 275 - Manual (Page 60)

46
C H A P T E R S E V E N
Changing One Touch and Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current name stored there,
then prompts you to either
1. CHANGE—OR—2. EXIT.
1 Press 1 to change the number stored, or press 2 to exit without
making a change.
2 Enter a new number and press Set .
■ If you want to erase the whole number, press Stop when the cursor is
to the left of the digits. The letters above and to the right of the cursor
are deleted.
■ If you want to change a digit, use or to position the
cursor under the digit you want to change, then type over it.
3 Follow the directions from Step 3 in Storing One Touch Numbers or in
Storing Speed Dial Numbers.