Cd changer operation – Blaupunkt FRANKFURT RCM 169 User Manual
Page 37
86
- RPT Trck = Repeat track
- RPT CD = Repeat CD
- RPT off = Repeat function off
•
Press RPT as many times as neces-
sary until you have selected the de-
sired setting.
The CD or the track will repeat until you
press RPT to switch off the function with
“RPT off”.
TPM
(Track Program Memory)
Use this feature to program and play your
favourite CD tracks.
It is possible to enter 99 discs with a maxi-
mum of 40 tracks each (depending on the
CD changer connected).
Switching TPM playback on/off
•
Press TPM briefly. The mode selected
will appear briefly in the display (“TPM
on/off”).
The red arrow will light up when TPM is ac-
tive. All of the CD tracks stored with TPM
will be played back.
TPM playback cannot be activated unless
you have already stored tracks with the TPM
function.
Storing tracks with TPM
A track can only be stored while it is play-
ing, TPM must be switched off.
Press CDC to switch the menu levels.
To store a track
•
press TPM for approx. 1 second, “TPM
Prog” will appear in the display.
This track has been stored.
Deleting the TPM
You can delete the tracks stored with TPM.
TPM tracks can be deleted with CLR only
when they are playing.
•
Switch on TPM.
If you would like to delete the track playing
•
press CLR for approx. 2 sec., “TR clr”
will flash briefly in the top line of the
display.
If you would like to delete all of the tracks
on the CD playing
•
press CLR for approx. 5 sec., “CD clr”
will flash briefly in the top line of the
display.
You can also delete all of the TPM tracks
stored.
If necessary, refer to the section on “Delet-
ing CD names/TPM at the same time”.
Selecting tracks
You can use the rocker switch to conven-
iently select tracks or passages.
/
Track selection
Up: Press briefly.
CUE - fast advance (audible): Hold
pressed down.
Down: Press twice or as many times
as required.
To re-start a title: Press briefly.
REVIEW - fast reverse (audible):
Hold pressed down.
The rocker switch acts as a sequence switch
so that you can skip over several CDs or
tracks if you press it repeatedly.
Repeating tracks/CDs
You can repeat a track or a CD as often as
desired. Press CDC to switch the menu lev-
els.
Use the RPT key to select the following func-
tions:
CD changer operation