Blaupunkt FRANKFURT RCM 169 - Manual (Page 11)

60
9 AUD
The AUD menu contains two pages.
Page 1:
Adjusts Treble, Bass, Fader (front/
rear), Balance (left/right), Loudness
(boosts lower frequency ranges at low
volume to create a more natural
sound) and SUB (-out) to adjust the
amplifier level for the SUB-woofer.
Making adjustments:
Select the operating mode.
Press AUD once and select the func-
tion you wish to adjust with the corre-
sponding key. “Bass” and the current
setting, for example, will appear in the
top line of the display.
Quick Reference
Use << / >> to alter the setting.
The last setting selected will be stored
automatically.
SUB-Out
If a SUB-woofer is connected to the
system, it is possible to adjust the out-
put level with “SUB” and / .
Page 2:
Switches on/off (DPE) and sets (LOW,
HIGH) the equalizer.
Switching the equalizer on/off:
Press AUD, NEXT and DPE in succes-
sion. Use the rocker switch << / >> to
switch DPE on or off.
The equalizer can be set with “LOW”
and “HIGH”.
For more information, refer to the sec-
tion on “Setting the equaliser”.
Switching AUD off:
Press AUD or EXIT.
Tape deck operation
/ Selects title (S-CPS)
Forward
Rewind
>> Fast forward
<< Fast rewind
CD changer operation
<< / >> Selects CDs
>>
Up: Press briefly
<< Down: Press briefly
/ Selects tracks
Up: Press briefly
CUE - fast forward (audible):
Hold pressed down
Down: Press briefly twice or
repeatedly in succession
Restart a track: Press briefly
Review - fast reverse (audi-
ble): Hold pressed down
8 DSC (Direct Software Control)
Use DSC to adjust those basic settings
which can be programmed. For more
information refer to “DSC program-
ming”.