Blaupunkt FRANKFURT RCM 169 - Manual (Page 35)

84
Repeating titles with RPT
RPT = Repeat
Repeats the title currently playing. This title
will repeat until RPT is switched off. The
Repeat function will end automatically when
the cassette is removed or the unit is
switched off.
The Repeat function is active when the cor-
responding red arrow lights up in the dis-
play.
To switch Repeat on/off:
•
Press RPT.
The active function will appear briefly in the
top line of the display and the DOT display.
To ensure that this function works properly,
there must be a pause of at least 3 seconds
between titles.
Fast tape forward/rewind
>> Fast forward
<< Fast rewind
Press REV to end fast forward or rewind.
Listening to the radio while fast
forwarding or rewinding the tape
with Radio Monitor (RM)
You can listen to the radio while fast for-
warding or rewinding the tape (for CPS as
well) instead of switching the sound to mute.
The Radio Monitor function is active when
the corresponding red arrow lights up in front
of ”RM”.
To switch Radio Monitor on/off:
•
Press RM.
The activated function will appear briefly in
the top line of the display and in the DOT
display.
Automatically skipping over
blank portions of the tape with
Blank Skip (BLS)
As soon as there is a pause of more than
10 sec. during cassette playback, the fast
forward will be activated automatically to
move to the next title.
The Blank Skip function is active when the
corresponding red arrow lights up in front of
“BLS”.
To switch Blank Skip on/off:
•
Press BLS.
The activated function will appear briefly in
the top line of the display and the DOT dis-
play.
Care instructions
You should use only C60/C90 tape cas-
settes in your car. Protect your cassettes
against dirt, dust and temperatures over
50
° C. Allow cold cassettes to warm up
somewhat before playing them to ensure
that the tape plays smoothly. Malfunctions
in playback or sound may be caused by dirt
build-up on the pinch roller and the audio
head after approx. 100 hours of operation.
To remove normal dirt build-up clean the
equipment with a cleaning cassette. In more
stubborn cases, use a cotton swab dipped
in rubbing alcohol. Never insert hard instru-
ments into the tape deck.
Tape operation