Blaupunkt FRANKFURT RCM 169 - Manual (Page 17)

66
Operating the unit for the first
time
To insert the KeyCard, unlock the operating
panel by
• pressing 1 , the operating panel will
fold down.
• Insert the KeyCard with the contacts
facing down as shown in the illustra-
tion (arrow 1).
2
1
3
• Push the card in the direction of the ar-
row (2) and lock the operating panel
back into position (arrow 3).
• Turn on the set with ON.
The car radio is now ready for operation.
Incorrect KeyCard
If a wrong KeyCard is inserted, then “Wrong
KC” will appear in the display.
Remove the wrong card and insert the cor-
rect KeyCard.
KeyCard theft protection system
Removing the KeyCard
To unlock the operating panel:
•
Press 1 , the operating panel will fold
down forwards.
• Push the card to the right as far as
possible and remove it to the front.
• Push the operating panel back into po-
sition.
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion. When
you leave the vehicle, unlock the
panel and remove the KeyCard
to protect the equipment against
theft.
This car radio comes equipped with one
KeyCard, but it can also be operated with a
second card.
If you have lost your KeyCard or if it was
damaged, you can buy a replacement Key-
Card from your specialised dealer.
If you use two KeyCards, the settings stored
on the first card will be transferred to the
second. However, you can individually store
the following functions:
Preset button assignments, bass, treble,
balance and fader settings, Loudness, TA
(traffic announcement volume), beep vol-
ume, LOW and HIGH (equalizer settings).
In addition, the settings activated before the
radio is switched off, such as the waveband,
station, TA priority, AF, REG on/off, SCAN
(time), seek tuning sensitivity, VOL (Power-
On volume) and SHARX will also remained
stored.
This ensures that you will find your basic
settings re-adjusted automatically as soon
as you have inserted your KeyCard.