Blaupunkt FRANKFURT RCM 169 - Manual (Page 25)

74
Radio operation with RDS (Radio Data System)
Seek tuning
Up
Down
<< / >> Down/Up in short intervals
(for FM only, when “AF” is
switched off)
Manual tuning with << / >>
You can also tune into a station manually.
Important:
AF and PTY must be switched off (i.e. the
symbols do not light up in the display).
If necessary, deactivate these functions in
menu level 2.
Manual tuning:
• Press << >>; the frequency will change
in short intervals downwards or up-
wards.
If you hold << or >> on the rocker switch
pressed down, the frequency scan will ac-
celerate.
Scrolling through the broadcast-
ing networks (FM only)
You can use the << >> buttons to tune into
stations in your reception area.
Important:
a) You must have tuned into the station
at least once before. To do this, you
can press TS to start Travelstore in
menu level 2.
If necessary, refer to the section on
“Automatically storing the strongest
stations with Travelstore”.
b) AF is switched on and PTY is switched
off. In this case, “PTY” will not light up
under the top line of the display.
If necessary, switch these functions on
or off in menu level 2.
Scrolling
If it is possible to receive several different sta-
tions in the station network, you can use >>
(forward) or << (back) to scroll through the
broadcasting network, e.g. NDR 1, 2, 3, 4 ...
Changing the memory bank (FM)
You can shift between the memory banks
FM1, 2, 3 and T in order to store stations
and recall them later.
• Press NEXT as often as necessary un-
til the desired memory bank lights up
in the DOT display.
Storing stations
On each of the FM memory banks (FM1, 2,
3 and T), you can store six stations on the
preset buttons 1 - 6.
On MW/LW, you can also store six stations
each.
•
Press TU, menu level 2 will appear in
the display.
• Select FM or MW/LW with AM.
For AM, press NEXT to select MW or LW.
•
Use the rocker switch to tune into a
station (either automatically / or
manually << >>).