BT PaperJet 35 - Manual (Page 45)

3. You can also change the settings
to switch from TAD/FAX to AUTOMATIC reception mode.
to set TAD/FAX reception mode.
to start recording a new OGM1
to end your OGM1 recording
to cancel any message transfer setting
to set Answer Only mode.
To print out your answer machine settings
You can print out details of the set up of the answer machine. It will also
show the original settings.
1. Press repeatedly until the display shows TAD SET-UP .
2. Press then repeatedly until the display shows PRINT TAD SET-UP .
3. Press . The display shows PRINT OUT: .
4. Press to print or to return to standby.
Using the answering machine 45
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
If entering a 2 digit instruction, wait for the
confirmation beep after the first digit before
pressing the second.
To cancel any of the remote access
instructions, press 0