BT PaperJet 35 - Manual (Page 18)

18
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
Resolution
Resolution is identified by an arrow in the bottom left hand corner of the
display when there is a document in the document feeder. The arrow
normally points at the standard resolution icon
. The resolution can
be changed to Fine or Photo .
If sending text and drawings with fine detail, press until the arrow
appears above the fine resolution icon .
If sending photos, press until arrows appear above the fine and
photo resolution icons .
Sending faxes
1. Insert the document to be sent in the automatic document feeder.
The display shows DOCUMENT READY .
2. If required, set the contrast and resolution.
3. Dial the number – or use redial or the one touch or speed dial directories –
then press .
To cancel the fax during sending, press .
When the fax has been sent, the display shows TX COMPLETED .
Automatic redial
If your BT PaperJet 35 cannot get through to the other machine, it will
automatically redial the number up to 3 times.
Delayed sending
You can store a document in your machine’s memory and set a time for
it to be sent.
1. Insert the document to be sent and set the contrast and resolution if
required.
Faxing
If you make a mistake dialling, press (<>) to
move the cursor to the digit and overwrite it
with the correct one. Or press
to delete
the whole number.