BT PaperJet 35 - Manual (Page 44)

3. Press . The display shows TYPE CODE (0-9) 1234 .
4. Enter the new 4-digit code you want. If you make a mistake, press
to delete the digits.
5. Press . Display shows PLAY UNLOCK .
6. Press to return to standby.
Toll saver
Providing you have set your BT PaperJet 35 to TAD/FAX mode, when
you call your it from another phone your answering machine will answer
after 2 rings if you have new messages. If you hear a third ring, you do
not have new messages. Now you can hang up before you are
connected, saving you the cost of a call.
1. Press repeatedly until the display shows TAD SET-UP .
2. Press then repeatedly until the display shows TOLL SAVER .
3. Press then or to switch between the options OFF or ON .
4. Press to return to standby.
Operating your answering machine
1. Dial your phone number. After your Answer and Record outgoing
message, enter your Remote Access Code (default setting 1234) on your
phone’s keypad.
2. Now use the buttons on the keypad to operate your answering machine.
to play new messages
to play all messages
to play previous message
to skip forward to the next message
to delete all played messages.
Using the answering machine 44
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
To set the number of rings for other
reception modes, see Additional settings,
‘Number of rings before answer’, page 49.
IMPORTANT
For Remote Access to work, your
BT PaperJet 35 must be set to FAX/TAD
reception mode. See page 35.