BT PaperJet 35 - Manual (Page 42)

Record a new Forwarding message
1. Press until the display shows TAD SET-UP .
2. Press then repeatedly to display REC. FORW. ANNOUNC .
3. Press . The display shows LIFT HANDSET .
4. Lift the handset and the display shows TO RECORD .
5. Press to begin recording. Speak your message into the handset.
The display counts down the time available.
6. Hang up the handset to end recording, the message is replayed.
Press to return to standby.
Security code
Use your security code to prevent unauthorised users from playing
messages or changing your answering machine settings. The default
code is 1234. You can change this.
Change code
1. Press repeatedly until the display shows TAD SET-UP .
2. Press then repeatedly until the display shows ACCESS CODE .
3. Press . The display shows TYPE CODE (0-9) 1234 .
4. Enter the new 4-digit code you want. If you make a mistake, press
to delete the digits.
5. Press . Display shows PLAY UNLOCK .
6. Press to return to standby.
Using the answering machine 42
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
The security code is also your answering
machine’s remote access code which is used
to access your messages from another
phone. See page 43.