Brother HL-5470DWT - Manual (Page 93)

87
General Information
3
WLAN TCP/IP Boot Method Auto
* / Static / RARP /
BOOTP
/ DHCP
Chooses the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)
*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)
*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)
* 1
Enter the Gateway address.
IP Boot Tries 0
/ 1 / 2 / 3* / ... / 32767 Specifies the number of
attempts the machine will try to
obtain an IP address when the
Boot Method
is set to any
setting except Static.
APIPA On
* / Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 On
/ Off* Enables or Disables the IPv6
protocol.
Setup Wizard
- - Configures the wireless network
settings using the setup wizard.
WPS/AOSS
- - Configures the wireless network
settings using WPS or AOSS™
method.
WPS w/PIN Code
- - Configures the wireless network
settings using WPS with a PIN
code.
Network Menu (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.