Bunn Dual TF DBC - Manual (Page 24)

Page 24
BREW OZ (SETTING OR ADJUSTING BREW VOL-
UMES)
This function allows adjustment of the brew vol-
umes for each batch. The indicator signifi es volume
in ounces per batch.
Procedure for modifying recipes - brew ounces:
Range: 10.0 oz to 400 oz for all three batch sizes
1. Press and hold the upper right hidden switch ®
until the display reads UNITS. Release the switch,
then press and release switch until the display
reads REVIEW RECIPES.
2. Press YES to proceed. The display should now
read NO-NAME LEFT, along with MODIFY, SHOW
and NEXT.
3. Press and release NEXT to advance to the desired
coffee name to be modifi ed.
4. Press and release MODIFY. The display should
read BREW OZ: and a batch light will be blinking.
P2291
Press and release the batch size to be modifi ed.
5. Using (-) and (+), set the amount of brew water,
in ounces, to be dispensed over the grounds for
that particular batch size.
6. When fi nished, press another batch size and repeat
step 5 for that size for each batch size to be modi-
fi ed. Continue setting all batch sizes.
7. When fi nished setting all batch sizes, press and
release DONE. The display should read 3 BATCH
SIZES DONE?
8. If the three batch sizes are not correct, press and
release NO to return to the BREW OUNCES setup
screen and repeat steps 5, 6 and 7.
9. If the three batch sizes are correct, press YES. This
will advance to the % BYPASS function. Another
alternative is to press and release either ON/OFF
switch to exit the BREW OZ setup and return to
the MAIN SCREEN.
PROGRAMMING THE BREWER (cont.)