Brother Sewing Manching - Manual (Page 28)

19
KNOWING YOUR SEWING MACHINE
CONOZCA SU MÁQUINA DE COSER
CONNAITRE SA MACHINE A COUDRE
Wide table
1. Open up the legs at the bottom of the wide table.
Pull out the four legs until they snap into place.
2. Pull the flat bed attachment off to the left.
3. Install the wide table.
1 Keeping the wide table level, fully slide it into place.
2 Turn the screw at the bottom of the legs to adjust their height.
4. When you are finished using the wide table, remove it.
While slightly lifting up the front of the wide table on the right side,
pull off the table to the left. Snap all four legs into storage
position.
5. Install the flat bed attachment back in its original position.
NOTE:
Do not install or remove the wide table with force, otherwise the
mounting hook may be damaged.
CAUTION
• Do not move the sewing machine while the wide table is
attached, otherwise damage or injuries may occur.
• Do not use the wide table for other purposes such as an
ironing board. This can cause damage and injury.
NOTE / Nota /Remarque
Mounting hook
Gancho de montaje
Crochet de montage
1
2
1
2