Setting up groups for broadcasting – Brother MFC-790CW User Manual
Page 96

Chapter 8
80
Setting up groups for
broadcasting
8
Groups, which can be stored on a Speed Dial
location, allow you to send the same fax
message to many fax numbers by pressing
only a Speed Dial, the 2-digit location,
Send a fax and Black Start. First, you'll
need to store each fax number in a Speed-
Dial location. Then you can include them as
numbers in the Group. Each Group uses up a
Speed Dial location. You can have up to six
Groups, or you can assign up to 198 numbers
in a large Group if you have 2 numbers in
each location.
(See Storing Speed Dial numbers
on page 77 and Broadcasting (Black & White
only) on page 39.)
a
Press Speed Dial.
b
Press More.
c
Press Setup Groups.
d
Enter the group name (up to 16
characters) using the buttons on the
LCD.
Press OK.
e
When the LCD displays the next
available Group number, press OK.
This Group number and name will
automatically be assigned to the next
available Speed Dial location.
f
Add Speed Dial numbers to the Group
by pressing them to display a red
checkmark. Press OK.
If you want to list the numbers by
alphabetical order, press
.
g
When the LCD displays the Group
Name and numbers, press OK to
confirm.
h
Do one of the following:
To store another Group for
broadcasting, repeat steps b to g.
To finish storing Groups for
broadcasting, press Stop/Exit.
Note
You can print a list of all the Speed Dial
numbers. Group numbers will be marked
in the GROUP column. (See Reports
on page 89.)
# 01