Brother MFC-790CW - Manual (Page 105)

Printing Reports
89
10
Fax Journal (activity report)
10
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or 24
hours, 2 or 7 days). If you set the interval to
Off, you can still print the report by following
the steps in How to print a report on page 89.
The factory setting is Every 50 Faxes.
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Report Setting.
e
Press Report Setting.
f
Press Journal Period.
g
Press d or c to choose an interval.
(If you choose 7 days, the LCD will ask
you to choose the first day for the 7-day
countdown.)
„ 6, 12, 24 hours, 2 or 7 days
The machine will print the report at
the chosen time and then erase all
jobs from its memory. If the
machine's memory becomes full with
200 jobs before the time you chose
has passed, the machine will print
the Journal early and then erase all
jobs from the memory. If you want an
extra report before it is due to print,
you can print it without erasing the
jobs from the memory.
„ Every 50 Faxes
The machine will print the Journal
when the machine has stored 50
jobs.
h
Enter the time to start printing in 24-hour
format.
Press OK.
(For example: enter 19:45 for 7:45 PM.)
i
Press Stop/Exit.
Reports
10
The following reports are available:
„ Transmission
Prints a Transmission Verification Report
for your last transmission.
„ Help List
A help list showing how to program your
machine.
„ Quick Dial
Lists names and numbers stored in the
Speed Dial memory, in alphabetical or
numerical order.
„ Fax Journal
Lists information about the last incoming
and outgoing faxes. (TX: Transmit.)
(RX: Receive.)
„ User Settings
Lists your settings.
„ Network Config
Lists your Network settings.
„ Caller ID hist.
Lists the available Caller ID information
about the last 30 received faxes and
telephone calls.
How to print a report
10
a
Press MENU.
b
Press a or b to display
Print Reports.
c
Press Print Reports.
d
Press the report you want.
e
(Quick Dial Only) Press
Alphabetical Order or
Numerical Order.
f
Press Black Start.
g
Press Stop/Exit.