Brother MFC-790CW - Manual (Page 100)

Chapter 9
84
i
Press Record OGM.
j
Record your message, using one of the
options below:
„ (MFC-790CW)
Pickup the handset, record your
message, and replace the handset
when finished.
„ (MFC-990CW)
Speak clearly toward the
microphone to record your
message. Press Stop/Exit when
finished.
The Message Center will play your
OGM back to you.
k
Press Stop/Exit.
Listening to your OGM
9
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Msg Ctr.
e
Press Setup Msg Ctr.
f
Press a or b to display OGM.
g
Press OGM.
h
Press Msg Ctr OGM or F/T OGM.
i
Press Playing OGM.
Adjust the volume by pressing Volume
d
or c.
j
Press Stop/Exit.
Erasing your OGM
9
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Msg Ctr.
e
Press Setup Msg Ctr.
f
Press a or b to display OGM.
g
Press OGM.
h
Press Msg Ctr OGM or F/T OGM.
i
Press Erase OGM.
j
Do one of the following:
„ Press Yes to erase the OGM.
„ Press No to exit without erasing.
k
Press Stop/Exit.
Fax/Tel OGM
(Announcement)
9
If your machine is set to Fax/Tel receive
mode this message will be played by your
Brother machine to a caller. Unlike the MC
OGM, the caller will not be able to leave a
message.
To record your Fax/Tel OGM follow the
instructions on Outgoing message (OGM)
on page 83 and choose F/T OGM (not
Msg Ctr OGM).
If you need to review the steps for setting up
the Fax/Tel receive mode, see Receive
Modes on page 45.
Activating Message Center
mode
9
When the light glows, Message Center
mode is active. Press to enter MC mode.