Netbios/ip, Set default, Netbios/ip -10 set default -10 – Brother HL-5280DW User Manual

Page 68

Text mode
Original mode

Control panel setup

8 - 10

■

PASSWORD

If you have selected LEAP for an authentication mode, you will need to enter a password that is 32
characters or less in length.

■

APPLY

In order to make your wireless settings effective, you must select the APPLY option from the WIRELESS
sub menu and then select YES or YES&REPORT. If you do not do this, the network settings will not be used
unless you switch the printer off and then on again.

NETBIOS/IP

You can enable and disable the NetBIOS facility to obtain the IP address.

SET DEFAULT

You can restore the WLAN menu settings to factory default.