Belkin F1UP0001 - Manual (Page 44)

43 42
Troubleshooting
43
Print Servers in Windows XP or 2000, but not Windows 98. Check
the Belkin website for compatibility issues at:
http://web.belkin.com/support/F1UP0001.
• If none of the computers can access the Print Server, then either:
1. The Print Server has not been configured correctly (in this
case, rerun the Setup Wizard);
2. Or, the printer you have connected to the Print Server does
not support a print-server connection. Check the Belkin
website for printer compatibility issues at: http://web.belkin.
com/support/F1UP0001.
Print job not going to correct printer, or not printing at all
• It could be that the computer is set to print to the wrong
printer. Verify that the printer connected to the Print Server is
set as the “default printer”.
• When troubleshooting a printing problem, try to determine
whether any of the computers on the network can access
the Print Server. If some computers can print, and some
cannot, then the problem is most likely not the Print Server
or the printer, but the printer driver settings on the specific
computer. In this case, run the Print Server Setup Wizard again
to reconfigure the computer. If this still doesn’t correct the
problem, delete the printer driver from your computer. Reinstall
it using the manufacturer’s CD that came with your printer
(it should direct you to check the manufacturer’s website for
updated drivers); then run the Setup Wizard again. In some
cases, drivers from a printer manufacturer might supportPrint
Servers in Windows XP or 2000, but not Windows 98. Check
the Belkin website for compatibility issues at: http://web.
belkin.com/support/F1UP0001
• If none of the computers can access the Print Server, then either:
1. The Print Server has not been configured correctly (in this
case, rerun the Setup Wizard);
2. Or, the printer you have connected to the Print Server does
not support a print-server connection. Check the Belkin
website for printer compatibility issues at: http://web.belkin.
com/support/F1UP0001.
P74496uk_F1UP0001_man.indd 42 20/7/04 12:53:39 pm